The 5050 RGB SMD LED Scanner Lighting Kit contains 4 seven inch LED lights which you can install in your car to give it a stylish look. There are also a number of flashing patters in it which will blow your mind away. Installing this lighting kit is even easier. You have to simply mount the kit to the front grille of your car and connect the red and black wires to the negative and positive terminals of your car’s battery respectively. Having done with that, you will have these beautiful and amazing lights successfully installed in your car. Kids simply love these lights! Here, in this article we have discussed a
The Actron CP9135 AutoScanner features a large, easy-to-read LCD screen that displays the definition of the trouble code. acsifsenegal For ODB II compliant (1996 and later) vehicles, the Actron CP9135 AutoScanner provides trouble code data, then erases trouble code and turns the Check Engine light off. Although you may still have to fix the problem, the scanner turns off the “Check Engine” warning light on your vehicle’s dash so you will not be distracted while you resume your drive.
The Actron CP9135 AutoScanner is simple and easy even for a non-professional to use. The attached cable with OBD II 16-pin connector provides connections for both power and data, while the eight-foot cars-scanner cable and the rugged housing are both oil-resistant and grease-resistant for added durability. The long cord that connects to the computer facilitates ease of use in tight spaces. Once connected, just press the “READ” key and the very user friendly menu displays a variety of information in a snap. Use the Monitor Status and Inspection / Maintenance (I/M) Readiness function to ascertain your vehicle’s chances of passing an emissions inspection. The I/M Readiness is a pragmatic function to use just before having your vehicle tested for compliance to the standards of a state emissions program.
One very important thing to take note of is cars-scanner that all emission testing facilities will not pass any vehicle that has an illuminated “Check Engine” light at the time of the inspection – even if the light is only lit to remind you of an over-due oil change or a 60,000-mile tune-up. Using the Actron CP9135 AutoScanner, you can turn off the check engine light and clear getsugarbalance the emissions test without any unnecessary hassle. The menu also reminds you of any pending DTCs and reads the status of the Malfunction Indicator Lamp. By reading the Malfunction Indicator Lamp status the scanner gives some insight into what might cause your Check Engine light to turn on in the near future. In this way, the Actron CP9135 scanner is also able to provide some preventive measures to help a non-professional user to monitor a vehicle’s on board systems.
bout the features and functions of these lights to give you a glance about them.
The kit comes with a 4 piece 7 inch LED strips (this means that each strip contains 12 pieces of SMD LED Lights).
55 types of different flashing patters to choose from.
Comes with a remote control to turn on the LED and to change the flashing pattern. The range of the remote control is 60 ft.
It is100% water resistant and so you won’t have to worry about the kit when doing extreme driving.
Easy to install and in fact you can do it by yourself as well! All you need to do is to tap the red wire to the positive terminal and the black wire to the negative terminal of the battery.
The functions of its remote:
You can turn them on and off with the remote.
You can change color of the lights according to your liking.
You can also change the flashing patter and pick any other patter from the 55 different flashing patterns.
Also, with the remote control you can change the speed with which the flash patterns run.
What is in the 5050 RGB SMD LED Scanner Lighting Kit?
In the package you will get one set of LED knight lights kit (i.e. 12-SMD LED Scanner Lighting Kit) and a remote control.
It will add a new charm to your car and will give it a chic and urban look. With this kit installed in your car it will be hard for the people on streets to let go your car unnoticed. The best thing about this kit is that it is very easy to install and it has 55 different flashing patters to choose from.
To win a set 7-color LED scanner lights, please visit iJDMTOY.com, the car LED guru for more detail.